Produktdetaljer
- Hem
- Produktdetaljer
Trefas multifunktionsmätare DSZ12WD-3X5A
vi fokuserar på fyra kärnområden
FoU och tillverkning av smarta energi- och vattenmätare
Utveckling av utrustning för IoT-kommunikation
Utformning och drift av intelligenta mätsystem
Molnbaserad analys av vatten- och elförbrukningsdata
Dela denna artikel :
DIN-rail three-phase multifunctional energy meter DSZ12WD-3x5A has passed the EU metrological certification MID certification (0120/SGS0314), with the advantages of compact size, high precision, good reliability, easy installation and so on. It adopts DIN35mm DIN-rail mounting structure, LCD display, measuring electric energy and other electric parameters, with the functions of compound rate measurement, electric energy pulse output, power failure key wake-up, automatic power feeding, LCD backlight display, and so on.
CT ratio setting function can match: 5:5,50:5,100:5,200:5,250:5,300:5,400:5,500:5,600:5,750:5,1000:5,1250:5,1500:5 and so on many kinds of current transformer ratios; it can be connected to the need for high-current equipment, suitable for direct access to the energy meter can not meet the demand for The current transformer can be connected to devices requiring high current.
- With DIN35mm rail mounting, width of 4 modules.
- Three-phase power metering with double-rate metering.
- LCD display, low power consumption.
- Real-time measurement of electrical parameters, such as voltage, current, power, etc..
- With passive optoelectronic isolation type, power pulse test output function.
With power failure display function, and does not use batteries, with environmentally friendly supercapacitor, in the absence of power supply, LCD can be displayed twice a day for two weeks. - Error information (false), with current reverse, loss of voltage / phase alarm indication function, when the phase is missing or current direction error “false” and the corresponding phase line will be displayed on the liquid display, at the same time the LCD backlight will be the same frequency blinking.
- Extendable with RS485 communication interface.
- The amount of power is displayed by means of a flashing bar with a frequency of 10 imp/kWh.
- Various CT variations can be set by applying jumpers.
| Krav på kabel | m㎡ |
| L | 16 |
| N | 16 |
| SO | 6 |
Eftersom produkten arbetar i en stark elektrisk miljö får endast certifierade eller skickliga elektriker installera denna elektroniska utrustning, annars finns det risk för brand eller elektriska stötar!
II. Produktparametrar
1. Elektriska parametrar
| volumetric L*W*H | märkspänning | nominell ström | Nominell frekvens | Startström | puls konstant | noggrannhet | Linjens strömförbrukning Pa(VA) |
| L：82 | 3×220/380V | 10(80) | 50 Hz | 0,04 lb | 1000 | 1级 | <0,5VA |
| W：72 | |||||||
| H：64 |
2、Maximalt tillåten tolerans
| aktuellt värde | effektfaktor (cosΦ) | procentuellt fel(%) |
| 0,05 lb | 1 | ±1.0 |
| 0,1 kg | 0.5L | ±0.5 |
| 0.8C | ±0.5 | |
| 0,1lb~Imax | 1 | ±0.5 |
| 0,2lb~Imax | 0.5L | ±0.5 |
| 0.8C | ±0.5 |
III. Tekniska parametrar
| föreställningar | Parametrar | ||
| LCD-displayens innehåll | retikulering | trefas, fyrtrådig (4-trådig) | |
| ingångsspänning | Rating | AC220V,400V | |
| Överbelastning | preservation：120%, momentary：200%/10s |
||
| Power Consumption | ＜ 0.5VA(per phase) | ||
| Impedans | ＞ 300kΩ | ||
| Precision | RMS measurements，0.2V | ||
| electric current | rating | AC:10-80A | |
| overloaded | preservation：120%, momentary：200%/10s |
||
| Power Consumption | ＜ 0.5VA(per phase) | ||
| Impedans | ＞ 20mΩ | ||
| Precision | RMS measurements，0.2V | ||
| frekvens | 40-60Hz, noggrannhet 0,1Hz | ||
| funktionalitet | Aktiv 1 | ||
| elektricitet | With power metering | ||
| visa | Realtid: elektrisk energi, spänning, ström, effekt | ||
| compound rate | Flera inställningar för CT-ändring | ||
| pulsutgång | 1 channel active pulse, optocoupler isolated | ||
| digitalt gränssnitt | SO+/SO- | ||
| driftstemperatur | -10-55℃ | ||
