Détail du produit
- Accueil
- Détail du produit
LXSY-15～40 Direct Reading Remote Water Meter
nous nous concentrons sur quatre domaines essentiels
R&D et fabrication de compteurs d'énergie et d'eau intelligents
Développement d'équipements de communication IoT
Conception et fonctionnement d'un système de comptage intelligent
Analyse des données de consommation d'eau et d'électricité basée sur le cloud
Partager cet article :
This product adopts a stable and reliable base meter from rotor-type water meter as the measurement basis,uses photoelectric direct reading sensor and bus communi-cation interface,and can cooperate with our company’s cloud platform to realize automatic remote meter reading of water meter information.Its，design conforms to GB-T778.1～5-2018 standard and《electronic remote water meter》(CJ/T 224-2012)standard.
◎ Adopts opposite-type,read the wheel data directly
◎ Adopts low power consumption design,power supply is required only when reading
◎ Using advanced data coding and verification methods,communication is stable and reliable
◎ Full-position photoelectric direct reading,no carry blind area,no software carry processing.
◎ adopts a stainless steel case,beautiful and durable.
This product adopts a stable and reliable base meter from rotor-type water meter as the measurement basis,uses photoelectric direct reading sensor and bus communi-cation interface,and can cooperate with our company’s cloud platform to realize automatic remote meter reading of water meter information.Its，design conforms to GB-T778.1～5-2018 standard and《electronic remote water meter》(CJ/T 224-2012)standard.
Flow parameters
| Nominal Bn(m |
Surcharge FacMPan |
Common o:Pat |
Transitional FlowRate Q₂ (M³/h) |
Min.flow-rate Q₁(M³/h) |
Range Ratio R(Q₃/q₁) |
Précision Class |
Temperature Class |
| DN15 | 1.25×Q₃ | 2.5 | 1.6×Q₁ | Q³/R | 160,125,100,80 | Class 2 | T30 |
| DN20 | 1.25×Q₃ | 4 | 1.6×Q₁ | Q³/R | 160,125,100,80 | Class 2 | T30 |
| DN25 | 1.25×Q₃ | 6.3 | 1.6×Q₁ | Q³/R | 160,125,100,80 | Class 2 | T30 |
| DN32 | 1.25×Q₃ | 6.3 | 1.6×Q₁ | Q³/R | 160,125,100,80 | Class 2 | T30 |
| DN40 | 1.25×Q₃ | 16 | 1.6×Q₁ | Q³/R | 160,125,100,80 | Class 2 | T30 |
Main technical parameters
| Electromechanical conversion mode | photoelectric direct reading | ||||||
| Electromechanical conversion accuracy | ±1m³ | ||||||
| Communication methods | RS485/M-BUS |
