Produkt Detail
- Startseite
- Produkt Detail
LXSY-15～40 Direct Reading Remote Water Meter
konzentrieren wir uns auf vier Kernbereiche
F&E und Herstellung von intelligenten Energie- und Wasserzählern
Entwicklung von IoT-Kommunikationsgeräten
Entwurf und Betrieb eines intelligenten Messsystems
Cloud-basierte Analyse von Wasser- und Stromverbrauchsdaten
Diesen Artikel teilen :
This product adopts a stable and reliable base meter from rotor-type water meter as the measurement basis,uses photoelectric direct reading sensor and bus communi-cation interface,and can cooperate with our company’s cloud platform to realize automatic remote meter reading of water meter information.Its，design conforms to GB-T778.1～5-2018 standard and《electronic remote water meter》(CJ/T 224-2012)standard.
◎ Adopts opposite-type,read the wheel data directly
◎ Adopts low power consumption design,power supply is required only when reading
◎ Using advanced data coding and verification methods,communication is stable and reliable
◎ Full-position photoelectric direct reading,no carry blind area,no software carry processing.
◎ adopts a stainless steel case,beautiful and durable.
This product adopts a stable and reliable base meter from rotor-type water meter as the measurement basis,uses photoelectric direct reading sensor and bus communi-cation interface,and can cooperate with our company’s cloud platform to realize automatic remote meter reading of water meter information.Its，design conforms to GB-T778.1～5-2018 standard and《electronic remote water meter》(CJ/T 224-2012)standard.
Flow parameters
| Nominal Bn(m |
Überlastung FacMPan |
Common o:Pat |
Transitional FlowRate Q₂ (M³/h) |
Min.flow-rate Q₁(M³/h) |
Range Ratio R(Q₃/q₁) |
Genauigkeit Class |
Temperature Class |
| DN15 | 1.25×Q₃ | 2.5 | 1.6×Q₁ | Q³/R | 160,125,100,80 | Class 2 | T30 |
| DN20 | 1.25×Q₃ | 4 | 1.6×Q₁ | Q³/R | 160,125,100,80 | Class 2 | T30 |
| DN25 | 1.25×Q₃ | 6.3 | 1.6×Q₁ | Q³/R | 160,125,100,80 | Class 2 | T30 |
| DN32 | 1.25×Q₃ | 6.3 | 1.6×Q₁ | Q³/R | 160,125,100,80 | Class 2 | T30 |
| DN40 | 1.25×Q₃ | 16 | 1.6×Q₁ | Q³/R | 160,125,100,80 | Class 2 | T30 |
Main technical parameters
| Electromechanical conversion mode | photoelectric direct reading | ||||||
| Electromechanical conversion accuracy | ±1m³ | ||||||
| Communication methods | RS485/M-BUS |
